Siemens Sinamics G120P Instruction Manual page 67

Defining the displayed time period and completing the configuration
• Set the required time period for the Trend View
• "Hours", "minutes" and "seconds" are individually selected
• Press OK to jump from hours to minutes/seconds
• Turn the wheel to change the number of hours/minutes/seconds
• In our example: "2 minutes"
• Press OK to continue
• A summary of settings is displayed
• Review off all settings
• Select "Continue" and press OK
• Select "Save" to complete the configuration
Hours
OK
Seconds
OK
Save
OK
The configuration process is completed by saving all of the settings. The screen will automatically return
to the status screen. The configured graph is immediately displayed. Now switch on the motor to see
how the graph displays selected motor parameters(e.g. motor current, motor frequency). You will see
how the motor accelerates according to the ramp-up time that you configured. Change the motor speed
to see how the graph changes.
Minutes
OK
Continue
OK
OK
2
OK OK
OK
2 minutes is a good time period-
for a quick analysis. 24 hours is
recommended for long-term
monitoring.
NOTE
55