Siemens Sinamics G120P Instruction Manual page 55

Basic commissioning
Restoring factory settings
• Choose "Yes"
• Confirm by pressing OK
Yes
OK
Control mode
• Select the required control mode by turning the wheel
• In our example: "V/f for a Parabolic Characteristic and ECO Mode"
• Press OK
V/f for a Parabolic Characteristic and ECO Mode
OK
Motor data
• Refer to the rating plate of your motor
• Select "Europe 50 Hz, kW" or "N. America 60 Hz" according your line supply and motor
• Press OK
50 Hz, kW
OK
Motor type
• Select the appropriate motor type
• Refer to the rating plate of your motor or consult the motor manual (also see Page 34)
• In our example: "Induction motor"
• Press OK
Induction motor
OK
OK
OK
OK
OK
43