Table of Contents
Advertisement
Note:
In the case of the dual extruder model, ensure that the release handles on
the extruder (#56A/B) are positioned as per the photo below otherwise
they will not align with the screw holes in the top plate (#A1).
Step 1.
Find out the locating holes on the top plate (#A1) and mount the the
extruder (#56) and from the underside of the top plate (#A1), fix in place
with 4 M4x 12 (#24A) screws..
Repeat this step for the other extruder (#56).
www.geeetech.com
ShenZhen GETECH CO.,LTD
GEEETECH
Dual extruder
Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 – 858
Page
60
Advertisement
Table of Contents
Need help?
Do you have a question about the Delta Rostock mini G2 pro and is the answer not in the manual?
Questions and answers