Flight Level Change Mode Display - Honeywell PRIMUS 1000 Pilot's Manual

The flight level change mode is annunciated on the PFD by
vertical capture location, as shown in Figure 6–23.
The pilot can maneuver the aircraft without disengaging the flight level
change mode by pushing and holding the TCS button on the control
wheel. While the TCS button is pushed, TCS ENG (white) replaces
ENG above the attitude sphere. When TCS is released, the airspeed
target is the current airspeed.
A28–1146–134
REV 1 Jan/03

Flight Level Change Mode Display

Figure 6–23
R
PRIMUS 1000 Integrated Avionics System
FLC at the
AD–63897@
Modes of Operation
6-31
AP