Fms Mode Capture And Tracking - Honeywell PRIMUS 1000 Pilot's Manual

R
PRIMUS 1000 Integrated Avionics System
The FMS NAV mode is shown in Figure 6–10.
The FMS NAV mode procedure is described in Table 6–3.
Step
1 Prepare the FMS to navigate. If necessary, set the heading
bug on the HSI to the intercept heading for the selected
course.
2 Select FMS as the navigation source by pushing the FMS
button on the display controller.
3 Push the NAV button on the mode selector. The NAV
button bar lights, and the active course is captured.
is annunciated on the top of the PFD, as shown in
Figure 6–11.
Modes of Operation
6-12

FMS Mode Capture and Tracking

Figure 6–10
FMS Navigation Mode Procedure
Table 6–3 (cont)
Procedure
LNAV
A28–1146–134
REV 1 Jan/03