Lndg Speeds Submenu - Honeywell PRIMUS 1000 Pilot's Manual

LNDG (LANDING) SPEEDS SUBMENU
The LNDG SPEEDS submenu, shown in Figure 3–12, selects and sets
two different airspeed references (VREF and VAPP), or returns to the
MAIN MENU. When this submenu is selected, the airspeed bugs and
values are displayed on the PFD airspeed display as fixed or moving
bugs.
On power–up, three dashes are displayed under the VREF and VAPP
labels.
D
Pushing the VREF button once replaces the dashes under the
VREF label with 100 knots. Two white boxes appear, one around the
default 100 knot V
speed value and VREF label. The two boxes indicate that the V
is active and can be changed. Values between 40 and 450 knots can
be entered in increments of one knot.
D
A second push of the button removes the box around the digital V
value, leaving a single box that indicates the V
cannot be changed. To activate the value, push any button other
than the VREF button.
D
A third push removes the single box, the V
reference bug from the PFD airspeed display. A fourth push of the
VREF button repeats the sequence.
Data entry for V
initial value defaults to the value set for V
been set.
A28–1146–134
REV 1 Jan/03

LNDG SPEEDS Submenu

Figure 3–12
speed value and the other around both the
REF
is the same as described for V
APP
R
PRIMUS 1000 Integrated Avionics System
(100 knots) if V
REF
Electronic Flight Instrument System (EFIS)
AD–63823@
is active and
REF
value, and the
REF
, except that the
REF
has not
REF
3-13
REF
REF