Mfd Tcas Annunciators - Honeywell PRIMUS 1000 Pilot's Manual

Automatic display of TCAS on the MFD is shown at the last selected
TCAS range. However, the first selection of TCAS on the MFD after
power–up always presents the 6 NM range.
D
TCAS Altitude Display Submodes – The TCAS submodes are
annunciated in the upper left corner of the TCAS window:
— NRM (not annunciated) – TCAS relative altitude is selected to
look at the normal TCAS altitude band.
— ABV/BLW – TCAS relative altitude is selected to look above or
below the normal TCAS altitude band.
— FL (Flight Level) – The actual altitude of the traffic is displayed.
D
TCAS Mode Annunciators – TCAS messages are annunciated in
the upper left corner of the TCAS window. The annunciators are
displayed whenever the MFD window format is in TCAS mode. If
TCAS is in the automatic mode, TCAS AUTO is annunciated in
white above the weather mode field.
The mode messages in Table 3–27 are listed in order of display
priority.
Message
TCAS TEST (white)
TCAS OFF (white)
TCAS FAIL
TA ONLY (white)
TCAS (white)
RA FAIL
(TCAS II only)
A28–1146–134
REV 1 Jan/03
PRIMUS
Indicates functional test in progress.
Displayed when TCAS is off.
Indicates TCAS system failure
Traffic advisory on.
Displayed if TCAS is selected for
display and none of the above TCAS
annunciators are currently displayed.
Resolution advisory fail.

MFD TCAS Annunciators

Table 3–27
Electronic Flight Instrument System (EFIS)
R
1000 Integrated Avionics System
Description
3-99