Honeywell PRIMUS 1000 Pilot's Manual page 50

R
PRIMUS 1000 Integrated Avionics System
T/O (TAKEOFF) SPEEDS SUBMENU
The T/O SPEEDS submenu, shown in Figure 3–11, selects and sets
three different airspeed references (V1, VR, and V2), or returns to the
MAIN MENU. Once selected (activated), the airspeed bugs and their
values are displayed on the PFD airspeed display.
On power–up, three dashes are displayed under the V1, VR, and V2
labels.
D
Pushing the V1 button the first time after power–up changes the
dashes under V1 to 89 knots. Two white boxes appear, one around
the default 89 knots, and the other around both the 89 knots and the
V1 label. The two boxes indicate that the V
changed using the SET knob. Values between 40 and 450 knots can
be entered in increments of one knot.
D
A second push of the button removes the box around the digital
V value, leaving a single box that indicates the V
SPEED
and cannot be changed. To activate the V1 value, push any button
other than V1.
D
A third push of the V1 button removes the single box, the V1 value,
and the V1 reference bug from the PFD airspeed display.
D
A fourth push returns to the beginning of the sequence.
Data entry for VR is the same as described for V1, except that the initial
value defaults to the value set for V1, or 89 kts if V1 has not been set.
Data entry for V2 is the same as described for V1, except that the initial
value defaults to the value set for VR, or 89 knots if VR has not been
set.
Electronic Flight Instrument System (EFIS)
3-12
T/O SPEEDS Submenu
Figure 3–11
AD–63822@
is active and can be
SPEED
SPEED
A28–1146–134
REV 1 Jan/03
is active