Asel At The Start Of Descent - Honeywell PRIMUS 1000 Pilot's Manual

R
PRIMUS 1000 Integrated Avionics System
Table 6–8 describes the ASEL mode operation procedure.
Step
1 Set the new target altitude on the PFD with the ALT knob
on the MFD bezel. Push either the VS or FLC button on
the FGS mode selector, then set the value for vertical
speed (VS mode) or airspeed (FLC mode) by using the
PITCH wheel on the autopilot controller to initiate a
descent toward the selected altitude.
Figure 6–25 shows the aircraft in the vertical speed mode
at the start of descent from
altitude of
–1500
Modes of Operation
6-34
15,000 feet at a selected vertical speed of
fpm.

ASEL at the Start of Descent

Figure 6–25
ASEL Mode Operation Procedure
Table 6–8 (cont)
Procedure
18,000 feet to the target
AD–63899@
A28–1146–134
REV 1 Jan/03