Setting The System Through F-Link Sw - jablotron JA-101K Manual

10 Setting the system through F-Link SW

The JABLOTRON 100 system is exclusively programmed using a computer, through F-Link software.
F-Link checks the current version of the software from version 1.4.0 through updates from the Jablotron server
and the latest version is automatically offered for download. Or after the login it can be downloaded from
the MyJABLOTRON web interface at www.myjablotron.com.
Immediately after opening the initial window for connection selection the F-Link software can be switched over
to the desired language environment by clicking on a language change icon (flag). You can change
the language at any time later. The initial window offers the following options:
1. Connect locally – for the connection of the computer to the control panel. A USB cable is necessary
(with A-B connectors).
2. Connect remotely – offering selection from a file database allowing you to establish a remote connection.
To establish remote communication with the control panel the computer must have access to the Internet
and the used SIM card in the control panel must have active GPRS data transmission. For trouble-free
connection other requirements must be met as e.g. enabled remote configuration in the control panel, proper
registration code, service code and if LAN communicator is not used, then also sufficient GSM signal
in the control panel location.
3. Offline settings – provide access to the setting data of the control panel. Here, you can e.g. get to the list
of devices or records of the last battery replacement etc.
The F-Link software can also be used to change the language of the control panel for communication with
users. The language does not only refer to displayed texts on the LCD screen or SMS messages sent to mobile
phones of users, but also the voice menu of communicators that communicate with the user. By changing
the language of the control panel you will delete all the texts in the system and therefore this selection should
be made as the first step before the installation and assignment of names to devices, sections or users.
The Jablotron system is delivered ex works with the communication language option set to "English" with
the possibility to select "Czech". However, other language options of the control panel are limited by a narrower
choice of language(s) per the country the control panel is designed for. The installation company that is
registered in the MyJABLOTRON web service
be bound to the unique equipment registration code. The "Activation Key", will extend the available choice
of languages designed by the manufacturer for the particular market. The Activation Key can be obtained
in three ways:
1. From the web interface, which is only accessible for trained installation technicians:
a. Login to the MyJABLOTRON web service
b. Open the MyCOMPANY section
c. Select the Activation Codes service
d. Click on the item + Get new activation code
e. Enter the Registration Key of the control panel and select "Send"
f. If an offer of more languages is displayed, select the requested languages and complete the selection
with "Send"
g. Make note of the Activation Code displayed in green and enter it in F-Link
The list of generated Activation Codes will remain saved at the website for possible further use.
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels
www.myjablotron.com can request the "Activation key", which will
www.myjablotron.com
57 / 110 MLJ51410