Description Of Ja-101K(-Lan)(-Lan3G) / Ja-101Kr(-Lan)(-Lan3G) - jablotron JA-101K Manual

3.1

Description of JA-101K(-LAN)(-LAN3G) / JA-101KR(-LAN)(-LAN3G)

The JA-101K-xxx control panel is designed for small BUS systems (limited by the output of the power supply)
and for medium-sized systems with wireless communication (JA-101KR-xxx). All variants of the JA-101K
control panels are equipped with a GSM communicator for a 2G network, for reporting voice messages, SMSes,
and GPRS data packets. With the "3G" GSM communicator variant it supports much faster data transmissions
and it allows data transmission and a voice call to be realized simultaneously and this gives better options
to the system. The variant with a LAN communicator which can be connected to the Internet and with the ability
to send data to secure mass storage areas, the so-called cloud (images taken by PIR detectors with a camera
or photo verification cameras) or to the server of security agencies with technical equipment for this data
to be received. Both communicators are also able to provide remote access using F-Link software.
The variant with "R" is supplemented by a radio module (JA-11xR) for radio communication with wireless
devices.
All the variants of control panels can be equipped with a JA-190X supplementary PSTN telephone
communicator to be connected to an analogue land line (e.g. PSTN) or to simulated telephone lines.
Can be used for the usual event reporting and it also serves as a backup communicator if the previously
mentioned communicators indicate faults.
1 - Back-up battery 2.6 Ah; 2 - Control panel PCB; 3 - GSM antenna; 4 - Transformer; 5 - Mains power terminals, 200 mA fuse;
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels
6 - Tamper contact of the housing; 7 - USB connector for PC connection
15 / 110 MLJ51410