Rf Signal - jablotron JA-101K Manual

A PG output does not react
to activation of a device

11.4 RF Signal

Window for graphic representation of radio band interference intensity with the possibility to select
from the used radio modules. Presence of signals in the band is indicated in blue. Red colour identifies
communication signals of the entire system (enrolled devices) and green is used to display the selected device
from the list of the Highlighted device item (see figure). Monitored interference logging (when the RF Signal
window is open) can be exported from the main menu to a file with the FDR suffix and the
can be used to import it back for viewing.
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels
Make sure the system in not in the Service mode.
In the Diagnostics tab check whether the device transmits information
to the control panel
In the PG Outputs tab check whether the output is not blocked by a section
status, device or schedule; check the Functions column for proper setting.
In the JA-11xN,JA-15xN modules check the DIP switches for proper binary
setting of the address and function of the module
96 / 110
button
MLJ51410