jablotron JA-101K Manual page 82

Disable – possibility to block a particular action. Disabling is indicated by a red dot. The Administrator
(using J-Link) and Service Technician (using F-Link) are authorized to disable the schedule.
Note – Provides the possibility of customized description of scheduled events
Annual schedule – Allows you to change the attribute of days (Mo, Tu, ...Su) for individual days of the current
and next year. You can change the attributed by (repeated) clicking of the mouse button on the corresponding
day. Application example: For a public holiday (non-working day) falling on Wednesday you can change
the attribute of the day from Wednesday to Sunday. Events that are automatically planned in accordance with
the basic settings of the Schedule and valid for working days are not carried out on this day. However,
the program valid for Sundays will be kept. This way you can adjust the control of Sections or PG Control e.g.
also for company holidays etc. The "Off" attributed means disabled – on days indicated like this no scheduled
event is executed.
Notes:
One schedule event can control (enable or disable) setting and PG outputs at the same time.
Switching an application on and off for a certain time is possible in 2 ways. You can either set an action
for enabling and an action for disabling the PG output or only an action for enabling and set an impulse of
the required length for the PG output.
If you select Setting (Partial setting) of a specified section, at the specified time an exit delay with the
fixed time of 3 min. is first activated. All sensors in the specified sections with the Immediate reaction are
readjusted to have the Delayed reaction during this 3 min period. If you select Unsetting, unsetting is
executed immediately without an exit delay and all the loops are active immediately (including delayed
detectors).
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels 82 / 110 MLJ51410