Communication Tab - jablotron JA-101K Manual

10.11 Communication tab

The tab is used to set the behaviour of communicators and the way of communication. To make changes
in this tab you do not need to be in the Service mode.
Primary transmission of voice reports – selecting the channel that the control panel will use to report voice
events (options GSM/PSTN).
Registration key – unique registration number of the control panel.
Voice menu without code – when using an authorized phone to control a function by calling, the user does
not have to enter his/her code (he/she is authorized by calling from his/her phone). For this function the caller's
identification (CLIP) must be activated
Forward messages to – selecting the user where SMS messages that are incomprehensible for the control
panel will be forwarded (invoicing information from the operator etc.)
Communication type – the system offers several methods of remote communication/configuration
- Without remote configuration – it behaves like an autonomous device with its own SIM card.
The device communicates outwards (sends SMS and voice messages) and receives command SMS and
has a functional voice menu. Remote configuration is not possible.
- Limited remote communication – communicates like the previous type and in addition it support remote
configuration of the system. Remote configuration is possible from a computer with the F-Link (J-Link)
software with an Internet connection. To establish connection to the control panel F-Link connects to the
manufacturer's server to provide it with the registration code and phone number of the SIM card inserted
in the control panel communicator. There must be functional data communication in the control panel
(LAN or GSM/GPRS).
- Jablotron communication – the device communicates with the manufacturer's server (MyJABLOTRON
application) and continuously sends information about the device status to it. Thus, if F-Link (J-Link)
sends a request for remote connection, the server is immediately ready to establish connection.
In addition, this communication allows the user to use server services. Applications allowing the user
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels 83 / 110 MLJ51410