Fw Updates For Wireless Devices; Check After A Fw Check; Info Window - jablotron JA-101K Manual

8. If during the control panel update F-Link finds damaged files in the SD card, it will format it and after
completion of the update it will offer the possibility of re-importing the original settings.
9. Perform a check in accordance with the description in chapter Check after a FW change 13.4 Check after
a FW check.

13.3 FW updates for wireless devices.

1. Open the updatable wireless device (JA-152E, JA-153E, JA-154E, JA-160PC, AC-160DIN etc.) by
pushing the latch.
2. If it contains batteries, remove them and disconnect possible external power supply.
3. Start F-Link, open the database and connect a USB cable to the computer (miniUSB or microUSB
depending on the used device).
Warning: USB cables are not included in the delivery of individual devices. We recommend you to use
direct USB connection to the PC, possible connection with a USB HUB may reduce reliability.
4. The update of FW of wireless devices must be carried out gradually, it cannot be done simultaneously
with more USB cables.
5. In the wireless device to be updated open the mode for loading new FW. In the case of other devices
follow the instructions of the respective manuals.
6. Then continue as during system upgrade with the F-
7. In the table of devices selection, select the USB item (typically in the first position).
8. More detailed information about the existing and new version of individual devices are displayed
in the bubble help after moving the mouse cursor over each of the offered devices.
9. By pressing the OK button you will upgrade all the devices.
10. After completion of the update disconnect the USB cable, reinsert batteries or connect the power supply
and make the module complete.
11. Perform a check in accordance with the description in the chapter Check after a FW change

13.4 Check after a FW check.

12. Go on to upgrade the next wireless device.
13.4 Check after a FW check
1. Check the settings of all the changed devices and control panel in F-Link, Devices / Internal Settings
Depending on the range of changes implemented during the update the previous setting may be
maintained or reset to the default production values. If reset to the default values has been done, you can
use the Import button in the internal settings of individual devices to select from previous settings.
2. If new items were added within the update, they will have the default settings. Check them and adapt
the settings as necessary for the installation
3. Check the settings and test the activity of the updated devices.

13.5 Info Window

It is opened from the main menu Control Panel / Info Window during
generation of the Info Window the control panel addresses all connected
devices and wireless devices to ask for their current information.
The Info Window offers a general overview of technical data of the entire
system, incl. control panel (serial number, registration code, FW and HW
version, voltage and current of the BUS, setting range of: devices, sections,
PG outputs), all the used communicators (GSM: phone number, signal BTS
number, LAN: status, MAC, IP, PSTN, phone line status) as well as all BUS
and wireless devices (uni and bidirectional): device type, identification
of FW / HW versions of individual devices and their status. It is available
in all statuses of the system (set / unset / service).
This data is necessary e.g. for communication with the technical consultant
for which the Save for Sending button in the bottom right corner is designed
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels 102 / 110 MLJ51410