Settings Tab - jablotron JA-101K Manual

Note: The "Common segment x" item is only offered if more than two segments for section
control are connected to the module.
PG indicates /
The segment can control a different PG output from the one it optically indicates. In this
controls menu the first parameter is used to select the PG output for indication and the other one
(supplementary) the PG output to control. The function is e.g. used to control a garage
gate with a PG output impulse while the control segment displays the actual status of the
gate obtained from the gate detector. A maximum 4 segments on one keypad can be
used when this function is selected.

10.5.1.2 Settings tab:

Acoustic indication of selected sections:
Higher volume
Alarms
Entrance delay
Exit delay
Exit delay when partly set
Segment status change
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels
Setting of indication volume except for an alarm
acoustic output in case of an alarm (siren sound)
continuous whistling tone during an entry delay
slow intermittent beeps (1/s)
slow intermittent beeps (off by default)
acoustic indication with one beep at a change
65 / 110 MLJ51410