10
EasyLine EL3000 Series Commissioning Instructions
Safety Information
Requirements for Safe Operation
Personnel Qualifications
Special Information and Precautions
National Regulations
Device Safety and Safe Operation
Protective Lead Connection
In order to operate in a safe and efficient manner the device should be
properly handled and stored, correctly installed and set-up, properly
operated and correctly maintained.
Only persons familiar with the installation, set-up, operation and
maintenance of comparable devices and certified as being capable of
such work should work on the device.
These include
The content of this operator's manual,
The safety information affixed to the device,
The applicable safety precautions for installing and operating
electrical devices,
Safety precautions for working with gases, acids, condensates, etc.
The regulations, standards and guidelines cited in this operator's manual
are applicable in the Federal Republic of Germany. The applicable
national regulations should be followed when the device is used in other
countries.
The device is designed and tested in accordance with the relevant safety
standards and has been shipped ready for safe operation. To maintain
this condition and to assure safe operation, read and follow the safety
information in this operator's manual. Failure to do so can put persons at
risk and can lead to device damage as well as damage to other systems
and devices.
The protective lead (ground) should be attached to the protective lead
connector before any other connection is made.