Gas And Electrical Connections For Fidas24 (Model El3020) - ABB EasyLine Series Instructions For Installation Start-Up And Operation

66 EasyLine EL3000 Series Commissioning Instructions

Gas and Electrical Connections for Fidas24 (Model EL3020)

Fidas24: Gas and Electrical Connections
30 Power supply 115 V AC or 230 V AC for heating the detector and sample gas inlet
(4-pin plug connector, connecting cable supplied)
31 Electrical connection to the heated sample gas inlet (hard mounted)
32 Test gas outlet
33 Zero gas inlet
34 Span gas inlet
35 Combustion air inlet
36 Combustion gas inlet
37 Instrument air inlet
38 Exhaust air outlet
Design: Male fitting for connecting the exhaust air outlet (stainless steel tube with outside
diameter = 6 mm, included in the scope of supply and delivery of the gas analyzer).
39 Sample gas inlet, heated or unheated
Design: Screw joint for PTFE or stainless steel tube with outside diameter = 6 mm
Design of the gas connections unless stated otherwise:
1/8 NPT female thread for threaded connections (not supplied)