58
EasyLine EL3000 Series Commissioning Instructions
Gas Connections for Magnos206 (Model EL3020)
Magnos206: Gas Connections
1
Sample gas inlet
2
Sample gas outlet
Design:
3
Sample gas outlet
Sample gas inlet
4
6
Pressure sensor
Design:
21 Sample gas inlet
22 Test gas inlet
Design:
Note:
1/8 NPT female thread (stainless steel 1.4305/SAE 303)
Connection of flexible tubes: straight screwed fittings (PP) with nozzles for flexible
tubes with inside diameter = 4 mm (supplied)
Connection of pipelines: Threaded connections (not supplied)
with the option "Integrated gas feed", connected ex works to 1 Sample gas inlet
with the option "Integrated gas feed", only with flow sensor (without solenoid
valve)
Screwed fittings with hose nozzles (stainless steel 1.4305/SAE 303) for hoses
with 4 mm inner diameter (supplied)
on the solenoid valve with option "Integrated gas feed" with solenoid valve, pump,
filter, capillary tube and flow sensor
Screwed fittings with hose nozzles (PVDF) for hoses with 4 mm inner diameter
(supplied)
The pressure sensor is installed as an option.