ABB EasyLine Series Instructions For Installation Start-Up And Operation page 47

Uras26: Gas Connections for Pipelines
(internal gas lines executed as stainless steel pipes)
6 Pressure sensor
Design:
11 Sample gas inlet
12 Sample gas outlet with one sample cell
13 Sample gas outlet with two sample cells in series
Design:
Note:
Magnos206: Gas Connections
1 Sample gas inlet
2 Sample gas outlet
Design:
Note:
Screwed fitting with hose nozzle (stainless steel 1.4305/SAE 303) for hose with
4 mm inner diameter (supplied)
1/8 NPT female thread (stainless steel 1.4305/SAE 303) for threaded
connections (not supplied)
The oxygen sensor, the option "Integrated gas feed" and the version with
separate gas feed paths are not possible.
1/8 NPT female thread (stainless steel 1.4305/SAE 303)
Connection of flexible tubes: straight screwed fittings (PP) with nozzles for flexible
tubes with inside diameter = 4 mm (supplied)
Connection of pipelines: Threaded connections (not supplied)
The sample gas outlet gas feed path 1 of the Uras26 is connected ex works to the
sample gas inlet of the Magnos206.
Installing the Gas Analyzer 47