Table of Contents
Advertisement
B R A V O ™ 8 1 0 5 M A C H I N E I N S T A L L A T I O N
2
Doors, Panels and Hood Covers
Hood and Chamber
Photograph
End Panels
2-56
The hood and chamber open manually. Gas springs aid in lifting them. The hood
has a quarter–turn latch similar to the electrical panel door.
The chamber has draw latches. Pull the latches away from the machine in a
forward direction to release the latch.
Verify that the hood and the chamber open unobstructed.
Verify that the chamber forms a continuous seal when lowered and secured.
The end panels at the Front and Rear of the Conveyor are secured by latches that
require a 15° Angle Wrench to open. The wrench is included with the system.
Attach the wrench to the hex head bolt and rotate it 1/4 turn to open the panel.
Bravo™ 8105 Installation Guide
Rev. 2
Advertisement
Table of Contents
