Table of Contents
Advertisement
Sound Level
Safety Perimeter
Chemical Precautions
Protective Gear
Exhaust Ventilation
Document Reference
2-9317-370-00-0
Noise levels are measured at 914.4 mm (36 in.) height and distance from the
front, rear, load and unload sides of the machine. All noise levels consistently
remain <70 dBa.
The machine is designed with a maximum length, width, and height. An access
clearance of 914.4 mm (36 in.) around the machine is required to maintain and
operate efficiently.
Exercise caution when using strong cleaning agents, solvents, lubricants and
other chemicals. MSDS guidelines contain specific uses and safety precautions
which must be thoroughly understood and strictly followed. If in doubt about any
safety notices, contact the manufacturer for clarification.
Refer to specific chemical manufacturers MSDS guidelines for disposal and/or
removal and handling of waste materials resulting from chemical operating
processes.
Protective clothing is required for servicing hot machine components or areas of
the machine which come in contact with chemical applications. Protective
clothing includes the following approval agency and items:
ANSI (American National Standard Institute) approved:
• Safety Goggles
NIOSH (National Institute for Occupational Safety and Health) OR
MSHA (Mine, Safety and Health Administration) approved:
• Respirator
• Steel Toe Safety Shoes
• High Temperature, Acid, and Water Resistant Gloves
• Apron
• Long-Sleeved garment
Ensure an adequate exhaust system is installed that filters and monitors the
system. Clean and monitor the exhaust ventilation system on a regular basis.
Retain copies of this Guide for reference and new personnel training.
Bravo™ 8105 Installation Guide
S A F E T Y I N F O R M A T I O N
Recommended Precautions
1-11
Advertisement
Table of Contents
