Electrical Connectors - Bravo 8105 Installation Manual

Electrical Connectors

Torque Connectors
Photograph
2-9317-370-00-0
It is important to perform this step before applying power to the machine.
CAUTION
Electrical Hazard: Ensure that power is not applied to the machine before
performing the following procedure. Failure to do so exposes personnel to
dangerous voltage levels.
It is possible for the wire connections to the electrical connections to become
loose during the crating, transportation and uncrating process. A potential fire
hazard exists if the wires overheat.
To ensure that a safety hazard does not exist, torque the appropriate connections
during machine installation (and also quarterly as part of the preventive
maintenance of the machine — refer to the Bravo™ Maintenance Manual).
Visually inspect all electrical connections first to see if any are noticeable loose or
damaged as a result of transit. There are electrical components in the electrical
cabinet as well as on the rear of the chamber where the blowers are wired. Check
for any debris that may have fallen onto a connection during uncrating. Clean out
any dust or particulate matter.
Figure 2–16
Bravo™ 8105 Installation Guide
B R A V O ™ 8 1 0 5 M A C H I N E I N S T A L L A T I O N
Electrical Connectors
2-41