EMC VNX Series Parts Location Manual page 5

Rear view
DVD
DVD
AC
AC
AC
AC
AC
Figure 1 Example of the Block and File VNX7500 platform (front view)
Note: The configuration in
configuration in Figure 3 on page 7
DAEs.
On the rear, viewing from top to bottom, a Block and File (Unified) VNX7500 platform
includes the following hardware components
Two 1U Control Stations
◆
Four 2U Data Mover enclosures with eight Data Movers
◆
AC AC
AC AC
AC AC
AC AC
AC
AC
Figure 1 is primarily used with the 3U or 2U DAEs only. The
is primarily used with a combination of the 4U and 3U
(Figure 2 on page
EMC VNX7500 Parts Location Guide
VNX7500 Block and File platform stackup
Control Station 1
(optional)
Control Station 0
AC
Data Mover
enclosure 3
(optional)
AC
Data Mover
enclosure 2
(optional)
AC
Data Mover
enclosure 1
(optional)
AC
Data Mover
enclosure 0
AC
Storage
processor
enclosure
SPS
6):
VNX-000622
5