Saving The Router Configuration - ADC Campus-REX2 RS User Manual

6 If you are only changing DHCP configuration, go to
Configuration" on page 55

Saving the Router Configuration

Do not remove power to the Campus unit or disconnect the
Line and LAN side network connections when upgrading
software or saving configuration.
1 Type
R
and Status screen
Jul 07, 2003
Local Unit ID:
Remote Unit ID:
Circuit ID:
LAN STATUS:
LINE STATUS:
MAC ADDRESS:
WARNING:
ENTER CHOICE>
2 Type 7
that the save in progress:
WARNING:
or Line connection.
Saving REX2 configuration; Please wait...
The following message is displayed when the save is completed:
REX2 configuration saved
Hit Any Key to Continue
Campus-REX2 RS Interface Card User Manual
ENTER
and press
(page 3-30).
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
REX2 CONFIGURATION AND STATUS
100BaseT, Full Duplex, Up
Standard, Auto, T1, Down
00:20:A7:01:02:08
1) Network Protocol:
2) Encapsulation:
3) Timing Source:
4) ROUTER CONFIGURATION
5) ROUTER STATISTICS
6) SNMP CONFIGURATION
7) SAVE REX2 CONFIGURATION
Configuration change(s) will be lost if not saved before
resetting or powering unit down.
to save changes. The following message is displayed to show
Do not power off unit or remove LAN
to save your changes.
until you return to the REX2 Configuration
Local I/F:
Remote I/F: REX2
Router
cHDLC
Internal
(R)eturn
Chapter 3 - Configuring the REX2
"Saving the Router
REX2
(Bridge, Router)
(cHDLC, PPP)
(Internal, HDSL)
55