Restoring Default Values - ADC Campus-REX2 RS User Manual

Chapter 4 - Managing System Parameters
R
ESTORING
You can restore all (any configurable parameter including HDSL and
network, for example) of the configuration options to their original factory
default values. This is a way to reset configurations you may have changed
and want returned to its original settings.
1 From the Main Menu, type
Jul 07, 2003
Local Unit ID:
Remote Unit ID: Inactive
Circuit ID:
ENTER CHOICE>
The System Parameters screen is displayed.
Jul 07, 2003
Local Unit ID:
Remote Unit ID: Inactive
Circuit ID:
1) CHANGE SYSTEM TIME
2) CHANGE SYSTEM DATE
3) CHANGE UNIT ID
4) CHANGE CIRCUIT ID
5) CHANGE UNIT PASSWORD
6) HDSL ES Alarm Threshold:
7) HDSL Margin Alarm Threshold:
8) Local Data Port LOS Alarm:
9) Remote Data Port LOS Alarm:
10) RESTORE FACTORY DEFAULTS
ENTER CHOICE>
70
D
EFAULT
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Southall Quad 4
Southeast line 421
1) SYSTEM STATUS
2) REX2 CONFIGURATION AND STATUS
3) SYSTEM CONFIGURATION
4) MAINTENANCE
5) REMOTE LOGON
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Southall Quad 4
Southeast line 421
SYSTEM PARAMETERS
(R)eturn
V
ALUES
3 ENTER
then press
Local I/F: REX2
Remote I/F: Inactive
MAIN MENU
(L)ogout
Local I/F: REX2
Remote I/F: Inactive
Disabled (Disabled, 17, 170)
Disabled
Disabled (Disabled, Enabled)
Disabled (Disabled, Enabled)
(M)ain Menu
Campus-REX2 RS Interface Card User Manual
.