ADC Campus-REX2 RS User Manual page 106

Chapter 6 - Managing Software
8 At the FTP prompt, enter the command to permanently save the upgrade
software to flash memory in the Campus-REX2, and restart the
Campus-REX2 with the new software, as follows:
ftp> quote site update
On a Windows-based PC, you may also use the command literal
site update. This command may take a few seconds before
returning to the FTP prompt. When the command completes, FTP, as
well as Campus-REX2 console and LCD, display messages indicating
that the upgrade is in progress. As indicated by the FTP message, the
save-and-restart operation may take up to 1 minute to complete.
9 At the FTP prompt, enter the command to exit FTP.
ftp> bye
As noted previously, the Campus-REX2 unit will restart automatically.
10 After the Campus-REX2 unit has restarted with the new software, you
may log in to the Campus-REX2 console as described in
on page 12.
The actual screen may differ based on the operating system
that you use.
94 Campus-REX2 RS Interface Card User Manual
"Logging In"