Dynamic Routing; Campus-Rex2 Ip Addresses - ADC Campus-REX2 RS User Manual

LAN
Remote
User
IP Address
192.168.200.5
Subnet Mask
255.255.255.0
Default Router
192.168.200.1
Default Router IP ADDR
LAN IP ADDR:
LAN SUBNET MASK
LINE IP ADDR
LINE SUBNET MASK

Dynamic Routing

Dynamic Routing uses protocols such as RIP and RIPv2 to automatically
learn the route or next hop it must take based on the IP address of the
destination contained in the datagram.

Campus-REX2 IP Addresses

Each Campus-REX2 unit has two IP addresses, the LAN address and the Line
address. In the figure on
indicates the LAN address, which is for the Ethernet (10/100Base-T)
connection. The shaded side of the Campus-REX2 is the IP Line address,
Campus-REX2 RS Interface Card User Manual
HDSL
Remote Site
HDSL Modem
Bridge/Routing Mode
Router
Packet Encapsulation
cHDLC
IP Static Routing Table
empty
empty
empty
empty
empty
empty
10.10.10.2
192.168.200.1
255.255.255.0
10.10.10.1
255.255.255.0
page 131, the non-shaded side of the Campus-REX2
Chapter 8 - Internetworking and Management Overview
Line
Local Site
HDSL Modem
Bridge/Routing Mode
Router
Packet Encapsulation
IP Static Routing Table
Destination 172.20.0.0
Gateway 172.16.100.1
Destination 172.30.0.0
Gateway 172.16.100.2
Destination 192.168.200.5
Gateway 10.10.10.1
Default Router IP ADDR
172.16.100.3
LAN IP ADDR:
172.16.100.4
LAN SUBNET MASK
255.255.255.0
LINE IP ADDR
10.10.10.2
LINE SUBNET MASK
255.255.255.0
LAN
Router to
172.20.0.0
LAN IP Address
172.16.100.1
cHDLC
Static Route to
192.168.200.5 via
172.16.100.4
Router to
172.30.0.0
LAN IP Address
172.16.100.2
Static Route to
192.168.200.5 via
172.16.100.4
Default Router
LAN IP Address
172.16.100.3
Static Route to
192.168.200.5 via
172.16.100.4
129