ADC Campus-REX2 RS User Manual page 55

3 Do one of the following:
•
From the Bridge Configuration screen, type
The ARP Table is displayed.
•
From the Router Configuration screen, type
The ARP Table is displayed.
TABLE>
4 Enter any of the following:
•
P to access the previous screen of the table
• N
to access the next screen of the table
•
F to find a specific table entry; the user is prompted to specify an
IP address for the destination device:
• E
to display all entries in a table without pages; this provides you
the capability to capture this information to a file using a terminal
emulation software (such as HyperTerminal or ProComm)
•
U to refresh or update the table entries
• C
to clear all entries from the table
Campus-REX2 RS Interface Card User Manual
MAC ADDRESS
00:00:00:00:00:01
00:00:00:00:00:03
00:00:00:00:00:04
00:00:00:00:00:06
00:00:00:00:00:07
00:00:00:00:00:09
00:00:00:00:00:0B
00:00:00:00:00:0C
00:00:00:00:00:0F
00:00:00:00:00:11
00:00:00:00:00:12
00:00:00:00:00:14
00:00:00:00:00:15
00:00:00:00:00:18
00:00:00:00:00:19
00:00:00:00:00:1B
(P)revious (N)ext
(U)pdate table
(R)eturn
Required format is nnn.nnn.nnn.nnn
Enter Destination IP Address: 156.10.0.28
Chapter 3 - Configuring the REX2
ARP TABLE
IP ADDRESS PORT
156.10 .0 .1 LAN
156.10 .0 .3 LAN
156.10 .0 .4 LAN
156.10 .0 .6 LAN
156.10 .0 .7 LAN
156.10 .0 .9 LAN
156.10 .0 .11 LAN
156.10 .0 .12 LAN
156.10 .0 .15 LAN
156.10 .0 .17 LAN
156.10 .0 .18 LAN
156.10 .0 .20 LAN
156.10 .0 .21 LAN
156.10 .0 .24 LAN
156.10 .0 .25 LAN
156.10 .0 .27 LAN
(F)ind (E)ntire table
(C)lear table
(M)ain Menu
4 then press ENTER
ENTER
6 then press
.
.
43