Chapter 3 - Configuring the REX2
Accessing the Routing Tables
The Campus-REX2 has two separate routing tables. One table shows routes
that were statically configured
page
57) and offers the capability of configuring additional static routes.
The other table shows IP addresses that were dynamically learned by RIP
("Viewing the Dynamic Routing Table" on page
Do the following to access the Router Configuration screen:
1
From the Main Menu
the REX2 Configuration and Status screen. Ensure Router is selected.
2
From the REX2 Configuration and Status screen, type
ENTER
. The Router Configuration screen is displayed.
Jul 07, 2003
Local Unit ID:
Remote Unit ID:
Circuit ID:
ENTER CHOICE>
56
("Managing the Static Routing Table" on
(page
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
ROUTER CONFIGURATION
1) IP ADDRESS CONFIGURATION
2) RIP CONFIGURATION
3) STATIC ROUTE CONFIGURATION
4) DYNAMIC ROUTE TABLE
5) STATIC ROUTE TABLE
6) ARP TABLE
7) DHCP SERVICES
(R)eturn
59).
1-14), type
then press
2
Local I/F:
Remote I/F: REX2
(M)ain Menu
Campus-REX2 RS Interface Card User Manual
ENTER
to access
4
then press
REX2