Bridge Port Statistics - ADC Campus-REX2 RS User Manual

•
number of frames received and transmitted
•
number of multicast frames received and transmitted
•
number of errored frames received and transmitted
•
number of undersized frames received
•
number of oversized frames received
•
number of excessive delay events for transmitted frames
•
number of excessive collision events for transmitted frames
•
number of bridge frames received and transmitted (Bridge only)
•
number of frames received that were discarded (Bridge only)

Bridge Port Statistics

To view the Bridge Port Statistics:
1 Press Escape until CAMPUS RS I/F: REX2 is displayed.
2 Press Next until REX2 CONFIG & STATUS is displayed.
3 Press Enter. CONFIGURE REX2 SETTINGS is displayed.
4 Press Enter. NETWORK PROTOCOL = Bridge is displayed (if not,
you must change the setting to Bridge to view Bridge Port Statistics).
5 Press Next until Bridge STATISTICS is displayed.
6 Press Enter. FRAMES is displayed.
7 Press Enter to display the first screen of statistics.
8 Press Next to display the second screen of statistics (if any).
9 Press Escape to return to the statistics title screen.
10 Press Next to advance to the remaining statistic items, displayed in order:
MULTICASTS, BRIDGE FRAMES, DISCARDS, ERRORS,
UNDERSIZED, OVERSIZED, EX. DELAY, and EX. COLLISIONS.
Repeat steps 7-9 as desired to display the statistics.
11 To clear the statistics, press Next until Press ENTER to Clear
Statistics is displayed. Press Enter to reset all statistics to zero.
Campus-REX2 RS Interface Card User Manual
Chapter 7 - Using the LCD for Configuration and Management
117