Chapter 2 - Configuring HDSL Parameters
C
ONFIGURING
You can configure options for four types of alarms:
•
HDSL ES Alarm Threshold determines the number of errored seconds
that must occur to trigger an alarm.
•
HDSL Margin Alarm Threshold determines the margin, in dB, that
triggers an alarm.
•
Alarm on Local I/F LOS lets you enable or disable the local Loss of
Signal alarm.
•
Alarm on Remote I/F LOS lets you enable or disable the remote Loss of
Signal alarm.
Access the configuration screen, then set the options.
Accessing HDSL Alarms Configuration
1
From the Main Menu
System Settings Menu.
Jul 07, 2003
Local Unit ID:
Remote Unit ID:
Circuit ID:
1)
SYSTEM PARAMETERS
2)
HDSL PARAMETERS
ENTER CHOICE>
26
HDSL A
LARMS
(page
14), type
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
SYSTEM SETTINGS MENU
(R)eturn
then press
ENTER
3
Local I/F:
REX2
Remote I/F: REX2
Campus-REX2 RS Interface Card User Manual
to access the