ADC Campus-REX2 RS User Manual page 64

Chapter 3 - Configuring the REX2
1 From the Router Configuration screen, type
The Static Route Configuration screen is displayed.
Jul 07, 2003
Local Unit ID:
Remote Unit ID:
Circuit ID:
ENTER CHOICE>
2 To add a static route, type
subnet mask, and gateway IP address at the prompt for the destination
host to which packets will be sent.
Required format is nnn.nnn.nnn.nnn
Enter Destination IP Address: 192.128.128.60
Enter Destination IP Subnet Mask: 255.255.255.0
Enter Gateway IP Address: 192.128.128.65
Enter Hop Count: 3
The following message is displayed:
3 To delete a static route, type
at the prompt for the destination host you want to delete.
Required format is nnn.nnn.nnn.nnn
Enter Destination IP Address: 192.128.128.60
If you do not remember the IP address for the destination you want to
delete, go to
52
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
STATIC ROUTE CONFIGURATION
1) ADD STATIC ROUTE
2) DELETE STATIC ROUTE
3) STATIC ROUTE TABLE
(R)eturn
1
Route added
Hit Any Key to Continue
Step 4 to view the Static Route Table.
3
Local I/F:
Remote I/F: REX2
(M)ain Menu
ENTER
then press
2 ENTER
then press
Campus-REX2 RS Interface Card User Manual
ENTER
then press
REX2
. Enter the IP address,
. Enter the IP address
.