ADC Campus-REX2 RS User Manual page 35

Using Extended Mode
With Extended mode, the HDSL link can comprise either one or two loops
with a rate selection in 64 (1 pair) or 128 (2 pair) kbps increments. The
transmission rate between two Campus-RS products is up to 4.608 Mbps with
two pair or 2.304 Mbps with one pair. Both the one loop network or two loop
network operate only in full-duplex transmission.
1 From the HDSL Parameters menu, type
HDSL Operating Mode options changes from Standard to Extended as
shown below.
Jul 07, 2003
Local Unit ID:
Remote Unit ID: Inactive
Circuit ID:
1) HDSL Operating Mode:
2) Transceiver Mode:
3) HDSL Loop Mode:
4) HDSL Rate:
*Note:
Enter (S)ave to apply changes !
ENTER CHOICE>
Campus-REX2 RS Interface Card User Manual
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
EXTENDED MODE HDSL PARAMETERS
Extended
Auto
2 Loops
256
1 Loop = single loop, full duplex
2 Loops = two loops, full duplex
(S)ave (R)eturn
Chapter 2 - Configuring HDSL Parameters
1 then press
Local I/F: REX2
Remote I/F: Inactive
(Standard, Extended)
(Auto, Master, Slave)
(1 Loop, 2 Loops)*
(M)ain Menu
ENTER . The
23