Lubrication
Greasing the Sprayer
Service Interval: Every 50 hours—Lubricate the
pump.
Every 50 hours/Yearly (whichever comes first)
Grease Type: No. 2 general-purpose lithium base
grease. Toro Premium All Purpose Grease is available
from your Toro Distributor.
1.
Wipe the grease fitting clean so that foreign
matter cannot be forced into the bearing or
bushing.
2.
Pump grease into the bearing or bushing.
3.
Wipe off excess grease.
The grease fittings positions are illustrated in
Figure 33
and
Figure
Figure 33
Pump center
1. Grease point
34.
g014161
Three inside each front wheel
1. Grease point
Greasing the Boom Hinges
Service Interval: Every 100 hours
Important:
If the boom hinge is washed with
water, all water and debris must be cleared from
the hinge assembly and fresh grease must be
applied.
Grease Type: No. 2 general-purpose lithium base
grease.
1.
Wipe the grease fittings clean so that foreign
matter cannot be forced into the bearing or
bushing.
2.
Pump grease into the bearing or bushing at
each fitting
Figure
34
Figure 34
35.
g002218