Maintenance; Sound Power; Sound Pressure; Hand-Arm Vibration - Toro Multi Pro 5800 Operator's Manual

Loading
The weight of the cargo can change the sprayer
center of gravity and sprayer handling. To avoid loss
of control and personal injury, follow these guidelines:
•
Reduce the weight of the load when operating
on hills and rough terrain to avoid tipping or
overturning of the sprayer.
•
Liquid loads can shift. This shifting happens
most often while turning, going up or down hills,
suddenly changing speeds, or while driving over
rough surfaces. Shifting loads can cause the
sprayer to tip over.
•
When operating with a heavy load, reduce your
speed and allow for sufficient braking distance. Do
not suddenly apply the brakes. Use extra caution
on slopes.
•
Be aware that heavy loads increase your stopping
distance and reduce your ability to turn quickly
without tipping over.

Maintenance

•
Only permit qualified and authorized personnel to
maintain, repair, adjust, or inspect the sprayer.
•
Before performing any maintenance, ensure
that the system has been thoroughly rinsed and
cleaned.
•
Before servicing or making adjustments to the
machine, stop the engine, set the parking brake,
and remove the key from the ignition to prevent
someone from accidentally starting the engine.
•
To make sure that the entire machine is in good
condition, keep all nuts, bolts, and screws properly
tightened.
•
To reduce the potential for fire, keep the engine
area free of excessive grease, grass, leaves, and
accumulation of dirt.
•
Never use an open flame to check the level or
leakage of fuel or battery electrolyte.
•
If the engine must be running to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of your body away from
the engine and any moving parts. Keep everyone
away.
•
Do not use open pans of fuel or flammable
cleaning fluids when cleaning parts.
•
Do not adjust the traction control speed. To
ensure safety and accuracy, have an Authorized
Toro Distributor check the ground speed.
•
Keep your body and hands away from pin hole
leaks or nozzles that eject high pressure fluid. Use
cardboard or paper to find leaks. Fluid escaping
under pressure can penetrate skin and cause
injury requiring surgery within a few hours by a
qualified surgeon or gangrene may result.
•
If major repairs are ever needed or assistance is
required, contact an Authorized Toro Distributor.
•
To be sure of optimum performance and safety,
always purchase genuine Toro replacement
parts and accessories. Replacement parts and
accessories made by other manufacturers could
be dangerous. Altering this sprayer in any manner
that may affect sprayer operation, performance,
durability, or its use, may result in injury or death.
Such use could void the product warranty.

Sound Power

This unit has a guaranteed sound power level of 99
dBA, which includes an Uncertainty Value (K) of 1
dBA.
Sound power level was determined according to the
procedures outlined in ISO 11094.

Sound Pressure

This unit has a sound pressure level at the operator's
ear of 85 dBA, which includes an Uncertainty Value
(K) of 1 dBA.
Sound pressure level was determined according to
the procedures outlined in EN ISO 11201.

Hand-Arm Vibration

Measured vibration level for right hand = 0.22 m/s
Measured vibration level for left hand = 0.26 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the
procedures outlined in EN 1032.

Whole Body Vibration

Measured vibration level = 0.3 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the
procedures outlined in EN 1032.
7
2
2
2
2
2