Toro Multi Pro 5800 Operator's Manual page 43

WARNING
Battery terminals or metal tools could
short against metal sprayer components
causing sparks. Sparks can cause the
battery gasses to explode, resulting in
personal injury.
• When removing or installing the
battery, do not allow the battery
terminals to touch any metal parts of
the sprayer.
• Do not allow metal tools to short
between the battery terminals and
metal parts of the sprayer.
• Always keep the battery strap in place
to protect and secure the battery.
3. Disconnect the positive (red) cable from the
battery post.
4. Remove the battery.
Installing the Battery
1. Set the battery on the battery box so that the
battery posts are away from the sprayer.
2. Connect the positive (red) cable to the positive
(+) battery post and the negative (black) cable to
the negative (–) battery post using the bolts and
nuts. Slide the rubber boot over both battery
posts.
3. install the battery cover and secure it with the
strap removed previously
Important:
Always keep the battery retainer
in place to protect and secure the battery.
Charging the Battery
Important:
Always keep the battery fully charged.
This is especially important to prevent battery
damage when the temperature is below 32 degrees
F (0 degrees C).
1. Remove the battery from the chassis; refer to
Removing the Battery.
2. Connect a 3 to 4 amp battery charger to the
battery posts. Charge the battery at a rate of 3
to 4 amperes for 4 to 8 hours (12 volts). Do not
overcharge the battery.
WARNING
Charging the battery produces gasses
that can explode.
Never smoke near the battery and keep
sparks and flames away from battery.
(Figure 47).
3. Install the battery in the chassis; refer to
Installing the Battery.
Storing the Battery
If the machine will be stored for more than 30 days,
remove the battery and charge it fully. Either store
it on the shelf or on the machine. Leave the cables
disconnected if it is stored on the machine. Store
the battery in a cool atmosphere to avoid quick
deterioration of the charge in the battery. To prevent
the battery from freezing, ensure that it is fully
charged.
43