Winter Storage - Taylor Wawa C708 Operator's Manual

OPERATOR'S CHECKLIST

Winter Storage

If the place of business is to be closed during the winter
months, it is important to protect the freezer by following
certain precautions, particularly if the building is subject
to freezing conditions.
Disconnect the freezer from the main power source to
prevent possible electrical damage.
On water-cooled freezers, disconnect the water supply.
Relieve pressure on the spring in the water valve. Use air
pressure on the outlet side to blow out any water
remaining in the condenser. This is extremely
important. Failure to follow this procedure may cause
severe and costly damage to the refrigeration system.
7
7-2
Your local Taylor distributor can perform this service for
you.
Wrap detachable parts of the freezer (such as beater,
blades, driveshaft, and freezer door) and place in a
protected dry place. Rubber trim parts and gaskets can
be protected by wrapping them with moisture-proof
paper. All parts should be thoroughly cleaned of dried mix
or lubrication, which can attract mice and other vermin.
It is recommended that a Taylor service technician
perform winter storage draining to ensure all water has
been removed. This will guard against freezing and
rupturing of the components.
Model C708 - WAWA
Operator's Checklist