Taylor Wawa C708 Operator's Manual page 26

USER INTERFACE
Manager's Menu Options
Press the arrow keys to move up or down through the
menu. Select a menu option by pressing the SEL key.
Exit the menu program by selecting EXIT FROM MENU,
or press the Cone key.
The following menu options are listed in the Manager's
Menu.
• EXIT FROM MENU
• SERVINGS COUNTER
• SET CLOCK
• AUTO HEAT TIME
• AUTO START TIME
• AUTO STANDBY TIME
• AGITATOR OPERATION
• MIX LEVEL AUDIBLE
• FAULT DESCRIPTION
• FAULT HISTORY
• LOCKOUT HISTORY
• HEAT CYCLE SUMMARY
• HEAT CYCLE DATA
5 • SYSTEM INFORMATION
• CURRENT CONDITIONS
• ENABLE WIFI
Exit From Menu
Selecting EXIT FROM MENU will exit the Manager's
Menu and return the control panel keys to normal
operation.
Servings Counter
The SERVINGS COUNTER screen is used to check or
reset the number of servings dispensed from the
machine. The SERVINGS COUNTER will automatically
reset to zero when the machine is brush-cleaned.
SERVINGS COUNTER
Draws 0
> Next
5-8
Reset the SERVINGS COUNTER by pressing the SEL
key to advance to the next screen. Press the Up arrow
key to move the arrow (>) to Yes and press the SEL key.
The servings counter will reset to zero and exit back to
the Manager's Menu.
RESET COUNTERS
ARE YOU SURE?
> Yes
No
Set Clock
The SET CLOCK option allows the manager to adjust the
control clock date and time. The date and time may only
be changed after the freezer has been manually cleaned,
but before it has been placed in the Auto or Standby
mode. The following message will be displayed if the
SET CLOCK option is selected when the machine is not
in a brush-clean state:
SET CLOCK
12:01
NO CHANGES ALLOWED
Press Any Key
To change the date or time, select the SET CLOCK
option in the menu. Press the Up arrow key to advance
the arrow from Exit to Change, then press the SEL key to
select the Change option.
SET CLOCK
12:01
Change
> Exit
Change the time by pressing the Up arrow with the
cursor under the hour position. Move the cursor to the
minutes position by pressing the SEL key. Once the
correct minutes are entered, press the SEL key to
advance the cursor to the month.
SET CLOCK
12:01
> Exit
Model C708 - WAWA
4/10/2012
4/10/2012
4/10/2012
User Interface