Removing The I/O Module; Figure 9: Snap The I/O Module Into Place; Figure 10: Removing The I/O Module - WAGO -I/O-SYSTEM 750 750-481/003-000 Manual

28 Assembly

Figure 9: Snap the I/O module into place

With the I/O module snapped in place, the electrical connections for the data
contacts and power contacts (if any) to the fieldbus coupler/controller or to the
previous or possibly subsequent I/O module are established.
Po s: 56.11 /Serie 750 (WAGO-I/O-SYSTEM)/Montieren/Busklemme entfernen @ 4\mod_1239169375203_21.doc @ 30334 @ 3 @ 1
4.2.2

Removing the I/O Module

1. Remove the I/O module from the assembly by pulling the release tab.

Figure 10: Removing the I/O module

Electrical connections for data or power contacts are disconnected when removing
the I/O module.
Po s: 57 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
WAGO-I/O-SYSTEM 750
750-481/003-000 2AI RTD Ex i
Manual
1.1.0