Advertisement
The default is "On".
On
Keypad boots up to number keys.
Off
Keypad boots up to arrow keys.
High
Sets the speed to high
Low
Sets the speed to low
Enabled
Enable IDE HDD Block Mode. BIOS will detect the block size
of the HDD and send a block command automatically.
Disabled
Disable IDE HDD Block Mode
Normal
The A20 signal is controlled by the keyboard controller or
chipset hardware
Fast
Default: Fast. The A20 signal is controlled by Port 92 or
chipset specific method.
The typematic rate determines the characters per second accepted by
the computer. Typematic Rate setting enables or disables the typemat-
ic rate.
BIOS accepts the following input values (character/second) for
Typematic Rate: 6, 8, 10, 12, 15, 20, 24, 30.
Advertisement
