Advertisement
To use this feature,follow this procedure:
a. In the "SiS VGA Configuration System" screen, choose "zoom-
ing" item to enter the "Zooming Hotkey" screen.
b. In the "Zooming Hotkey" Screen, choose which "hot-key" you
would like to use and enable it.
c. After completing the selections, choose "OK" to make all your
selections effective.
d. After completing the setup, you may use your own defined hot
key to zoom-in or zoom-out.
Note: The power saver's timer settings would be effective even
after exiting Windows back to DOS.
SiS 5597/5598 supports DCI drivers for software MPEG playback
and other media player programs which can take advantage of
DCI.
The SiS 5597/5598 DCI driver is automatically loaded during the
"Windows Driver Unpack & Copy" process. Therefore it should
be transparent to the end-user and any media players can take
advantage of it.
To make software MPEG playback better than what your original
software MPEG player supplier provided, SiS provide an
MMPlayer application program to provide a VCP-like (Video
Cassette Player) interface.
To take advantage of the SiS MMPlayer, you must first install
"SW MPEG Player". SiS provides an interface but not a software
MPEG player. If the software MPEG player (Xing or Mediamat-
ics) does not exist, the SiS MMPlayer will not work.
To use the SiS MMPlayer, choose the "SiS MMPlayer" icon in the
"SiS Multimedia Vx.xx" program group and the SiS MMPlayer VCP-
like icon will appear. You can then enjoy the software MPEG
playback.
Advertisement
