MIO-2263 Intel
SBC, DDR3L, 18/24-bit LVDS, VGA or HDMI, 1 GbE,
Half-size Mini PCIe, 4 USB, 2 COM, SMBus,
mSATA & MIOe
Startup Manual
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
1. 1 MIO-2263 SBC
2. 1 Startup Manual
3. 1 SATA cable
4. 1 Audio cable
5. 1 COM cable
6. 1 SATA Power cable
7. 1 USB cable
8. AT power cable
9. 1 Heatsink
10. Screw and stud pack (2 screws
for Mini PCIe, 4 M3 studs and
screws for heatsink)
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1:
For detailed contents of MIO-2263, please refer
to Advantech website for detailed information.
Note 2:
Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
http://get.adobe.com/reader/ (Acrobat is a trade-
mark of Adobe)
Note 3:
Default BIOS is supported for 64 bit OS installa-
tion, BIOS for 32 bit OS is supported by project,
please contact with sales representative for
details.
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/support/
This manual is for the MIO-2263 Series Rev. A1
Part No. 2006226301
Printed in China
Atom
SoC J1900/ E3825 Pico-ITX
®
TM
p/n: 1700006291
p/n: 1700022444-01
p/n: 1701200220
p/n: 1700019656
p/n: 1700002172
p/n : 1700019705
p/n: 1960063455T001
p/n: 9666226300E
2nd Edition
August 2014
Specifications
General
• CPU: Intel
Atom™ SoC Quad core J1900 2.0 GHz/ Dual
®
core E3825 1.33 GHz
• System Memory: 1 x 204-pin SODIMM socket DDR3L
1333 MHz (J1900) / 1066 MHz (E3825), up to 8 GB
• L2 Cache: 2 MB (J1900) / 1 MB (E3825)
• BIOS: AMI EFI 64 Mbit Flash ROM
• Watchdog Timer: 255 level interval timer
Battery: Lithium 3 V/210 mAH
Note:
How to clear CMOS (Must follow steps below):
1. Turn off system power.
2. Unplug CR2032 battery cable on BH1.
3. Waiting for 15 sec or short BH1 pin1-2.
4. Connect battery cable on BH1.
5. Turn on system power.
• Serial ATA: Two SATA II interface, one supports 2.5" HDD
and another for mSATA devices, up to 300 MB/s
• USB: One USB 3.0 and three USB 2.0 ports
• Audio: High definition audio (HD), line-in, line-out
• GPIO: 8-bit general purpose input/output
• Expansion Interface: Half size Mini PCIe
MIOe Expansion Slot
• Interface: 2 x USB 2.0, 2 x PCIe x1, LPC, HD Audio
line-out, SMBus, DP or HDMI supported by request, 5
Vsb/12 Vsb
• Total peripheral power supply output: 5 V @ 3 A for
CPU board and MI/O Extension module totally, 12 V @ 2
A for MI/O Extension module
VGA/HDMI Interface
• Controller: Intel
SoC J1900 / E3825, DirectX 11 and
®
OpenGL3.0 support for VGA and HDMI display output
Chrontel CH7511 for 18/24 bit LVDS display output
• Output Interfaces:
- VGA: Up to 1920 x 1200
- HDMI: 1920 x 1080
- LVDS: Single channel 18/24-bit LVDS,
up to 1440 x 900
- Dual Display: VGA + LVDS or HDMI + LVDS
Ethernet Interface
• Supports single 10/100/1000 Mbps Ethernet interface
• Controller: Intel® i210
MIO-2263 Startup Manual 1