Advertisement
i. When the system reboots, double-click the "SiS Install" icon. It
will perform the further installation.
j. When the "Select Screen Parameters for SiS SVGA" dialog
appears, select the resolution, color depth and frame rate you
would like, then click "OK"
k. The installation program will create a "SiS Setup" icon on the
desktop.
l. Shutdown and re-boot OS/2 Warp.
a. Before installing the SiS OS/2 Warp display driver, start up OS/
2 system in standard VGA mode.
b. Select "Command Prompts" folder.
c. Select "OS/2 window" or "OS/2 full screen" icon.
d. Place the CD-ROM disc into the CD-ROM drive.
e. Change directory to D:\MIC3000\SiS5598\MM\OS2\SBCS.30
f. Type SISINST and then press "Enter".
g. When the "Select Screen Parameters for SiS SVGA" dialog
appears, select the resolution, color depth and frame rate you
would like and then click "OK".
h. The installation program will create a "SiS Setup" icon on the
desktop.
i. Shutdown and re-boot OS/2 Warp.
Advertisement
