Advertisement
Two available frame rates are 87 (interlaced) and 60 Hz.
For example: Set 1280 x 1024 graphic mode with 60 Hz frame rate:
/PA: Set standby timer to be ta minutes. (0 < ta < 15 min.)
For example: Set Standby Timer to be 5 minutes:
/PB: Set suspend timer to be tb minutes. (0 < tb < 15 min.)
For example: Set suspend timer to be 5 minutes:
Note:
1. Suspend time would be "ta + tb". (i.e. standby time + suspend
time)
2. The timers will not be very accurate and approximate the time
that you set
Concerning how to setup VGA for AutoCAD R11, AutoCAD
R12, AutoShade R2.0 and 3D Studio Version 3.0., please refer to
MIC3000\SiS5598\README.TXT on the accompanying CD-ROM
disc.
a. Select Control Panel from Main group.
b.Select Display icon.
c. Select Change Display Type from Display Settings.
d. Select Change from Display Type.
Advertisement
