Advertisement
The MIC-3355's on-board Ethernet interface supports all major
network operating systems. To configure the medium type, to
view the current configuration, or to run diagnostics:
1. Power-on the MIC-3355. Ensure that the utility CD-ROM disc is
located in the CD-ROM drive.
2. At the prompt, type \MIC3000\RTL8139A\RSET8139.EXE and
press <Enter>. The Ethernet configuration program will then be
displayed.
3. This simple screen shows all the available options for the
Ethernet interface. Just highlight the option you want to change
by using the Up and Down keys. To change a selected item,
press <Enter> and a screen will appear with the available
options. Highlight your option and press <Enter>. Each
highlighted option has a helpful message guide displayed at the
bottom of the screen for additional information.
4. After you have made your selections and are certain it is the
configuration that you want, press ESC. A prompt will appear
asking if you want to save the configuration. Press Y if you
want to save.
The Ethernet Setup Menu also offers three very useful diagnostic
functions:
1. Run EEPROM test.
2. Run Diagnostics on Board.
3. Run Diagnostics on Network.
Each option has its own display screen which shows the format
and result of any diagnostic tests undertaken.
Advertisement
