Advertisement
e. Select Other from Select Device.
f. Place the CD-ROM into CD-ROM Drive.
g. When the "Install from Disk" dialog box appears, type
"D:\MIC3000\SiS5598\MM\WINNT\WINNT35" and click "OK".
h. Select Install and click "Yes" when the "Installing Driver" dialog
box appears.
i. Select New when the "Windows NT Setup" dialog box appears.
Click "Continue".
A message will appear stating that the drivers were successfully
installed. Click "OK". You must now restart Windows NT 3.51.
a. Select Control Panel from the Main group.
b. Select Display icon.
c. Select Color Palette to change between 16 colors, 256 colors,
32768 colors, 65536 colors and 16777216 colors.
d. To select desktop resolution size, go to the Desktop area and
use the slide bar to change resolution from 640 x 480, 800 x
600, 1024 x 768, and 1280 x 1024.
e. Select Test to test the resolution.
f. If the display test screen was good then select "Yes" when the
"Testing Mode" dialog box appears. If the display test screen
was bad then select "No". Windows NT will give you an error
message.
g. If the display test screen was good and you select "Yes",
Windows NT 3.5x will prompt you to restart Windows NT
3.5x.
Advertisement
