Advertisement
a. Click the "Start" menu and select Control Panel from the
Settings group.
b. Select the Display icon.
c. Select Settings of Display Properties.
d. Select Display Type.
e. Select Change from the Adapter Type area.
f. Select Have Disk in the Change Display screen.
g. Place the CD-ROM disc into the CD-ROM drive.
h. When the "Install from Disk" dialog box appears, type
"D:\MIC3000\SiS5598\ MM\WINNT\WINNT40" and click
"OK".
i. When the "Change Display" dialog box appears, click "OK".
j. When the "Third-party Drivers" dialog box appears, click "Yes".
A message will appear stating that the drivers were successfully
installed. Click "OK". You must now restart Windows NT 4.0.
a. Click the "Start" menu and select Control Panel from the
Settings group.
b. Select Display icon.
c. Select Settings.
d. Select Color Palette to change between 16 colors, 256 colors,
32768 colors, 65536 colors and 16777216 colors.
e. To select desktop resolution size, go to the Desktop area and
use the slide bar to change resolution from 640 x 480, 800 x
600, 1024 x 768 to 1280 x 1024.
f. Select Test to test the resolution. If the display test screen was
good then select "Yes" when the "Testing Mode" dialog box
appears. If the display test screen was bad then select "No".
Windows NT will give you an error message.
g. Click "OK". If the display test screen was good and you select
"Yes", Windows NT 4.0 will change the mode without restart-
ing Windows NT 4.0.
Advertisement
