a. Before installing SiS OS/2 V2.1 display driver, start up OS/2
system in standard VGA mode.
b. Select "Command Prompt" folder.
c. Select "OS/2 window" or "OS/2 full screen" icon.
d. Place the CD-ROM disc into the CD-ROM drive.
e. Change the directory to D:\MIC3000\SiS5598\MM\OS2\SBCS.21.
f. Type SISINST then press "Enter".
g. When the "Select Screen Parameters for SiS SVGA" dialog
appears, select the resolution, color depth and frame rate you
would like, then click "OK"
h. The installation program will create a "SiS Setup" icon on the
desktop.
i. Shut down and re-boot OS/2 V2.1.
a. Before installing SiS OS/2 Warp display driver, start up OS/2
system in standard VGA mode.
b. Select "Command Prompt" folder.
c. Select "OS/2 window" or "OS/2 full screen" icon.
d. Place the CD-ROM disc into the CD-ROM drive.
e. Change the directory to D:\MIC3000\SiS5598\MM\OS2\DBCS.30.
f. Type SETUP and then press "Enter".
g. Setup procedure will create a "SiS Install" icon on the desktop.
h. Shutdown and reboot the OS/2 Warp system.