Page 2
The documentation and the software included with this product are copyrighted 2017 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
Page 3
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out of- warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Page 4
Discard used batteries according to the manufacturer's instructions. Technical Support and Assistance Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
Page 5
Screw R/S D=5.3 H=2 + M3*15L, 4 pcs 1910002596-01 Stud F=M3*10L M=M3*5L B=5 H=19, 4 pcs 193B0204C0 Screw F/S D=3.5 H=0.8 + M2*4L, 2 pcs * Only for MIO-3360 C-type Ordering Information Model Number Description Intel® Pentium N4200, fanless, LVDS, SATA, mini PCIe, MIOe,...
Page 6
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Page 7
PC is on. ESD (electrostatic discharge) can cause either catastrophic or latent damage in sensitive electronic components. Take appropriate measures to ensure that any accumulated body charge is removed before accessing electronic devices. A static-safe workbench is ideal. MIO-3360 User Manual...
Chapter General Introduction This chapter gives background information on the MIO-3360. Sections include: Introduction Product Features Specifications...
Introduction MIO-3360 is a MI/O-Ultra SBC (Single Board Computer) with Embedded Intel® Pen- tium N4200/Celeron N3350/Atom™ E3940/Atom™ E3930 Processor. MIO-3360 can support DDR3L memory up to 8 GB, and has one LVDS, one SATA connector and a full size miniPCIe/mSATA slot on board. There is no rear I/O on the coastline; expan- sion is via 4 x USB2.0, USB 3.0/2.0, 2 x PCIe x1, LPC, HD audio line in/line out/mic...
2 x RS-232/422/485 serial ports with ESD protection: air gap ± 15 kV, contact ± 8 kV Controller: SMSC SCH 3114 GPIO 8-Bit (programming) through Super I/O, by 64pin 5 V tolerance SMBus 64-pin connector support (default) MIO-3360 User Manual...
Chapter H/W Installation This chapter explains the setup procedures of the MIO-3360 hard- ware, including instructions on setting jumpers and connecting peripherals, as well as switches, indicators and mechanical draw- ings. Be sure to read all safety precautions before you begin the...
Mini PCIE / mSATA Select 2.1.3 Jumper Settings Table 2.2: J1: LCD Power Selection Part Number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3*2P 180D(M) 2.0mm SMD SOUARE PIN Setting Function (1-2) (3-4) (default) +3.3V (5-6) (default) Auto Power On MIO-3360 User Manual...
2.3.2 Board Dimensions 2.3.2.1 CPU Board Drawing Unit: mm Figure 2.3 MIO-3360 Mechanical Drawing (Top Side) Unit: mm 4 MIO 3360 M h i l D Sid ) Figure 2.4 MIO-3360L Mechanical Drawing (Bottom Side) Unit: mm Figure 2.5 MIO-3360 Mechanical Drawing (Side View)
Unit: mm Figure 2.6 MIO-3360 Mechanical Drawing (Side View with Heatspreader) 2.3.3 Quick Installation Guide A heatsink is in the white box, please take it out and remove the protective paper from the thermal pads. Remove the protective paper There are also four screws inside the white box, please install the DRAM in the...
For best heat conduction, the gap between the chassis and heat spreader should be small; the smaller the better. The height of the existing heat spreader is TBD (Advantech P/N: TBD). If you need some other height to fit the chassis better, Advantech can customize it for you.
BIOS supports your CPU. If there is no number assigned to the patch code, please contact an Advantech application engineer to obtain an up-to-date patch code file. This will ensure that your CPU's system status is valid.
3.1.2 Advanced BIOS Features Setup Select the Advanced tab from the MIO-3360 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
Page 28
3.1.2.1 Driver Health Provides Health Status for the Drivers/Controllers. 3.1.2.2 ACPI Settings MIO-3360 User Manual...
Page 29
Lock Legacy Resources Enables or Disables Lock on Legacy Resources 3.1.2.3 SCH3114 Super IO Configuration Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA) Serial Port 2 Configuration Set Parameters of Serial Port 2 (COMB) MIO-3360 User Manual...
Page 30
3.1.2.4 H/W monitor PC Health Status This page displays all information about system Temperature/Voltage. Watch Dog Timer Enable or Disable Watch Dog Timer function. MIO-3360 User Manual...
Page 31
3.1.2.5 S5 RTC Wake Settings Wake system from S5 Enable or disable system wake on alarm event. Select FixedTime, system will wake on the hr:min:sec specified. MIO-3360 User Manual...
Page 32
Serial Port Console Redirection Console Redirection This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Services (EMS). Console Redirection This item allows users to configure console redirection detail settings. MIO-3360 User Manual...
Page 33
CPU Configuration Intel Virtualization Technology When enabled, a VMM can utilize additional hardware capabilities provided by Vanderpool Technology. VT-d Enable/Disable CPU VT-d. Monitor Mwait Enable/Disable Monitor Mwait. P-STATE Coordination Change P-STATE Coordination type. MIO-3360 User Manual...
Page 35
Storage Controls the execution of UEFI and Legacy Storage OpROM. Video Controls the execution of UEFI and Legacy Video OpROM. Other PCI devices Determines OpROM execution policy for devices other than Network, Storage, or Video. MIO-3360 User Manual...
Page 36
Maximum time the device will take before it properly reports itself to the Host Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor. MIO-3360 User Manual...
3.1.3 Chipset Configuration North Bridge Details for North Bridge items. South Bridge Details for South Bridge items. Uncore Configuration Details for Uncore Configuration. South Cluster Configuration Details for South Cluster Configuration. MIO-3360 User Manual...
Page 39
3.1.3.1 North Bridge Max TOLUD Maximum value of TOLUD. MIO-3360 User Manual...
Page 40
3.1.3.2 South Bridge Serial IRQ Mode Configure Serial IRQ Mode. SMBus Support Enable/Disable SMBus Support. OS Selection Select target OS. MIO-3360 User Manual...
Page 41
DVMT Total Gfx Mem Selects DVMT 5.0 Total Graphic Memory size used by the Internal Graphics Device. Cd Clock Frequency Select the highest Cd Clock frequency supported by the platform. GT PM Support Enable/Disable GT PM Support. MIO-3360 User Manual...
Page 42
PCI Express Configuration PCI Express Configuration settings. SATA Drives Press <Enter> to select the SATA Device configuration setup options. SCC Configuration SCC Configuration settings. USB Configuration USB Configuration settings. Miscellaneous Configuration Enable/Disable Misc. features. MIO-3360 User Manual...
Page 43
HD-Audio Configuration HD-Audio Support Enable/Disable HD-Audio support. LPSS Configuration MIO-3360 User Manual...
Page 44
Select to Enable or Disable Onboard LAN1 Controller. LAN Option ROM Enabled / Disabled Onboard LAN's PXE option ROM. PCIE Wake from S5 Enable or disable PCIE to wake the system from S5. WiFi Function Control Enable or Disable WiFi function. MIO-3360 User Manual...
Page 45
SATA Drives Chipset SATA Enable or Disable the Chipset SATA controller. MIO-3360 User Manual...
Page 46
SCC Configuration SCC eMMC Support (D28:F0) Enable/Disable SCC eMMC support. MIO-3360 User Manual...
Page 47
Selectively Enable/Disable corresponding USB port from reporting a device connection to the controller. XHCI Disable Compliance Mode Options to disable XHCI Link Compliance Mode. USB HW MODE AFE Comparators Enable/Disable USB HW MODE AFE Comparators. MIO-3360 User Manual...
Page 48
BIOS Lock Enable or Disable the BIOS Lock feature. RTC Lock Enable or Disable bytes 38h-3Fh in the upper and lower 128-byte bank of RTC RAM lockdown. TCO SMI Lock Enable TCO and lock down TCO. MIO-3360 User Manual...
3.1.4 Security Select Security Setup from the MIO-3360 Setup main BIOS setup menu. All Security- Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press <Enter>:...
Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. New Boot Option Policy Controls the placement of newly detected UEFI boot options. MIO-3360 User Manual...
This item allows you to save the changes done so far as user defaults. Restore User Defaults This item allows you to restore the user defaults to all the options. Boot Override Boot device select can override your boot priority. MIO-3360 User Manual...
S/W Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology.” We enable Windows embedded software products on Advantech platforms to more effec- tively support the embedded computing community. Our goal is to make Windows embedded software solutions easily and widely available to the embedded comput- ing community.
However, due to the inaccuracy among many commercially available hardware mon- itoring chips, Advantech has developed a unique scheme for hardware monitoring - achieved by using a dedicated micro-processor with algorithms specifically designed for providing accurate, real-time and reliable data content;...
Page 56
If a previous version is located, please see the [Maintenance Setup] section. If no previous version is located, an alternative window appears. Click Next. MIO-3360 User Manual...
Driver version and Library version show the major SUSI version (4.0) and the revi- sion number (12921). If there is any problem, it is recommended that you send a screenshot of this page or key in the information displayed here to your local FAE. MIO-3360 User Manual...
Page 59
1, setting Level will not work for it. Hardware Monitor Hardware monitor will read out all accessible hardware sensors for voltage, tempera- ture, fan speed and board current, and record the minimum and maximum values. MIO-3360 User Manual...
Page 61
Slave address and Command. – Insert the length of data you'd like to read in text box Read Length, and then click the Read button for read/receive operation. – The read result will be shown in the Result text box. MIO-3360 User Manual...
Page 62
Text box Input Data allows inputs of characters [0-9], [a-f], [A-F] and space only. When you are inserting multiple bytes, add a space to let the program know that you are going to insert the next byte data. MIO-3360 User Manual...
Page 63
Slave Address. – Insert the length of data you'd like to read in text box Read Length, and then click Read button for read/receive operation. – The read result will be shown in the Result text box. MIO-3360 User Manual...
Page 64
Text box Input Data allows inputs of characters [0-9], [a-f], [A-F] and space only. When you are inserting multiple bytes, add a space to let the program know that you are going to insert the next byte data. MIO-3360 User Manual...
Page 65
If the backlight control method is not available, the radio button will be un-clickable. – Adjust the slider to adjust the brightness value. – Click the Get button to get the current brightness value. MIO-3360 User Manual...
Page 66
Event type is None, you don't need to insert the event time. – Set the event time within range of max/min event time; for the detail of value setting, please refer to section Information of Time Setting. MIO-3360 User Manual...
Page 67
– Trigger Timer: When watchdog timer is started and the delay time ends, click Trigger button to reset/restart the timer. – Stop Timer: When watchdog timer has started, clicking the Stop button will completely stop the timer. MIO-3360 User Manual...
(3-4) (default) +3.3 V (5-6) (default) Auto Power On Table A.3: J2: Mini PCIE / mSATA Select Part Number 1653002101-03 Footprint HD_2x1P_79_H236_D Description PIN HEADER 1X2P 2.00mm 180D(M) DIP 1140-000-02SN Setting Function (Open) mSATA (Closed) (default) Mini PCIE MIO-3360 User Manual...
Page 71
Part Number 1653007166-01 Footprint HD_32X2P_79_H303_D Description Pin Name 12V Input 12V Input 12V Input 12V Input Inverter 5V Output Inverter ENABKL Inverter VBR Inverter 12V Output VGA DDC DAT VGA DDC CLK VGA RGB GND VGA RGB GND MIO-3360 User Manual...
Page 73
VGA RGB GND VGA GND VGA 5V Output VGA HSYNC VGA VSYNC USB 5V Output USB 5V Output USB0 D- USB1 D- USB0 D+ USB1 D+ USB Chassis GND LAN LINK 100 LED- LAN LINK 1000 LED- MIO-3360 User Manual...
Page 74
DIP 64 Pin Part Number 1653007166-01 Footprint HD_32X2P_79_H303_D Description Pin Name LAN ACT LED+ LAN ACT LED- LAN BI_DA+ LAN BI_DA- LAN BI_DB+ LAN BI_DB- LAN BI_DC+ LAN BI_DC- LAN BI_DD+ LAN BI_DD- LAN Chassis GND LAN Chassis GND MIO-3360 User Manual...
Page 76
SODIMMDDR3RVS_204 Part Number 1651002083 Footprint DDR3_204P_AS0A626-JA Description DDR3 SODIMM H=9.2mm 204P SMD AS0A626-HARN-7H Pin Name MIO-3360 User Manual...
Page 77
CN10 Mini PCIE Part Number 1654002538 Footprint FOX_AS0B226-S68K7F Description MINI PCI E 52P 6.8mm 90D SMD AS0B226-S68Q-7H Pin Name WAKE# +3.3VSB +1.5V REFCLK- REFCLK+ W_DISABLE# PERST# PERn0 +3.3VSB PERp0 MIO-3360 User Manual...
Page 79
CN10 Mini PCIE Part Number 1654002538 Footprint FOX_AS0B226-S68K7F Description MINI PCI E 52P 6.8mm 90D SMD AS0B226-S68Q-7H Pin Name +1.5V SMB_CLK PETn0 SMB_DAT PETp0 USB D- USB D+ +3.3VSB +3.3VSB +1.5V +3.3VSB MIO-3360 User Manual...
Page 80
CN11 SATA Part Number 1654011616-01 Footprint SATA_7P_WATF-07DBN6SB1U Description Serial ATA 7P 1.27mm 180D(M) SMD WATF-07DBLSB1UW Pin Name MIO-3360 User Manual...
Page 81
CN18 MIOe Part Number 00A00001150 Footprint MIOE_CPUSIDE Description Pin Name PCIE_RX0+ PCIE_TX0+ PCIE_RX0- PCIE_TX0- PCIE_RX1+ PCIE_TX1+ PCIE_RX1- PCIE_TX1- PCIE_RX2+ PCIE_TX2+ PCIE_RX2- PCIE_TX2- PCIE_RX3+ PCIE_TX3+ PCIE_RX3- PCIE_TX3- MIO-3360 User Manual...
Page 82
CN18 MIOe Part Number 00A00001150 Footprint MIOE_CPUSIDE Description Pin Name PCIE_CLK+ LOUTL PCIE_CLK- LOUTR AGND SMB_STB_CLK SMB_STB_DAT PCIE_WAKE# RESET# PowerOn MIOe_SCI LPC_AD0 DDP_HPD LPC_AD1 LPC_AD2 DDP_AUX+/DDC_CLK LPC_AD3 DDP_AUX-/DDC_DAT MIO-3360 User Manual...
Page 83
CN18 MIOe Part Number 00A00001150 Footprint MIOE_CPUSIDE Description Pin Name LPC_SERIRQ DDP_D0+ LPC_FRAME# DDP_D0- USB0_D+ DDP_D1+ USB0_D- DDP_D1- USB1_D+/USB_SSTX+ DDP_D2+ USB1_D-/USB_SSTX- DDP_D2- USB2_D+/USB_SSRX+ DDP_D3+ USB2_D-/USB_SSRX- DDP_D3- USB_OC# MIO-3360 User Manual...
Page 84
CN18 MIOe Part Number 00A00001150 Footprint MIOE_CPUSIDE Description Pin Name +12VSB +12VSB +5VSB +5VSB +5VSB +5VSB CN26 Battery Part Number 1655902032 Footprint WHL2V-125 Description WAFER BOX 2P 1.25mm 180D(M) DIP 53047-0210 Pin Name MIO-3360 User Manual...
Page 85
CN28 12V Power Input Part Number 1655003684 Footprint WF_4x2P_79_BOX_RD1_D Description Pin Name +12V +12V +12V +12V MIO-3360 User Manual...
Page 86
HDD LED+ PULL to +V3.3 Reset Button Pin2 HDD LED- SMB 5V Output SMB DAT SMB CLK I2C DAT I2C CLK GPIO 5VSB Output GPIO4 GPIO0 GPIO5 GPIO1 GPIO6 GPIO2 GPIO7 GPIO3 USB 5V Output USB 5V Output MIO-3360 User Manual...
Table A.4: 64-Pin Connector B RS-232 RS-422 RS-485 Signal Name Signal Name Signal Name DCD# DATA- DSR# DATA+ RTS# CTS# DTR# DCD# DATA- DSR# DATA+ RTS# CTS# DTR# MIO-3360 User Manual...
Communications Port (COM2) IRQ4 Communications Port (COM1) IRQ5 Available IRQ6 Available IRQ7 Available IRQ8 Internal RTC or HPET IRQ9 Microsoft ACPI-Compliant System IRQ10 Available IRQ11 SMBus Port IRQ12 Available IRQ13 Numeric data processor IRQ14 SATA controller IRQ15 SATA controller MIO-3360 User Manual...